API 5CT J55 casing tube introduction and features
Standard: API 5L
The steel grade of API 5CT J55 casing tube is low in oil drilling. API 5CT J55 casing tube is widely used in shallow oil and gas production. Compared with other grades of steel, API 5CT J55 casing tube has low cost and wide application, which can be widely used in shallow wells, geothermal wells and water wells.
E-mail: [email protected]
The steel grade of API 5CT J55 casing tube is low in oil drilling. API 5CT J55 casing tube is widely used in shallow oil and gas production. Compared with other grades of steel, API 5CT J55 casing tube has low cost and wide application, which can be widely used in shallow wells, geothermal wells and water wells.
Chemical composition of API 5CT J55 casing tube
Grade |
C |
Si |
Mn |
P |
S |
Mo |
Ni |
Cr |
Cu |
API 5CT J55 |
- |
- |
- |
0.03 |
0.03 |
- |
- |
- |
- |
Mechanical properties of API 5CT J55 casing tube
Grade |
Tensile strength |
Yield strength |
Elongation % |
|
API 5CT J55 |
517 |
379 min |
552 max |
0.5 |
API 5CT J55 casing tube features
1, The surface of thread of coupling and API 5CT J55 casing tube should be smooth without any tear, burr or other defects that may have a negative impact on the strength and close connection.
2, API 5CT J55 casing tube is offered with a free length range from 8m to 13m on basis of the SY/T6194-96 norm. However, it is also available no less than 6m length and its quantity should be no more than 20%.
3, Deformations which mentioned above are not allowed to appear on the outer surface of API 5CT J55 casing tube coupling.
4, Any deformation such as crease, separation, hairline, crack or scab is not acceptable on both inner and outer surfaces of the product. All these defects should be completely removed, and the removed depth must not exceed 12.5% of nominal wall thickness.
BBN is a professional steel manufacturer export API 5CT J55 casing tube, we have our own factory to produce the API 5CT J55 casing tube. If you want to purchase API 5CT J55 casing tube, please contact us freely. We can supply the API 5CT J55 casing tube according your requirement.
-
EN 10210 S355J2H hollow section
-
GB/T 18248 35CrMo seamless pipe
-
GB/T 18248 34CrMo4 seamless pipe
-
GB/T 18248 30CrMo seamless pipe
-
GB/T 8163 Q345E seamless alloy s
-
GB/T 8163 Q345D seamless alloy s
-
GB/T 8163 Q345C seamless alloy s
-
GB/T 8163 Q345B seamless steel p
-
GB/T 8163 20# seamless steel pip
-
EN 10297 42CrMo4 seamless pipe a
PRODUCT
Contact
- Henan BEBON Iron&Steel co., ltd.
- 0086-371-86151827
- 0086-371-86011881
- [email protected]
- Online Consultation
-
1358 tons 35CrMo pipes for Tanza
We exported 1358 tons 35CrMo seamless pipe to Tanzania in Ap ...
-
1200 tons SA204Gr.B Seamless pip
NNPC has long-term cooperation with SINOPEC---China Petroleu ...
-
A106M GRB PIPE FOR BIR SEBA Fiel
The Pipelines and Products Marketing Company (PPMC) by oil m ...